WAW-1000B Computerized Electro-hydraulic Servo UTM Machine

Usage:

It is mainly used for mechanical testing properties such as tensile, compression, bending and shearing of metal materials, also can do the tensile, compression and bending test under environment, for example: high temperature tensile, low temperature tensile and compression and other tests.

Application industry:

Aerospace, machinery manufacturing, building materials and other industries of material inspection and analysis, scientific research institutes, universities, industrial and mining enterprises, technical supervision and so on

Main features:

1. The host machine

The machine is equipped with a cylinder under the host machine, tensile upward and compression downward.

2. Hydraulic system

The hydraulic oil in the fuel tank is driven by the motor into the oil passage through the motor, flows through the check valve, the high pressure oil filter, the pressure difference valve group, the servo valve and enters the cylinder. The computer sends out the control signal to the servo valve, controls the opening and the direction of the servo valve, thus controls the flow rate into the cylinder, realizes the constant speed test force, the constant velocity displacement and so on the control.

3. Electrical measurement and control system:

Servo control oil core components are imported original device, stable performance.

With overload, over-current, overvoltage, displacement upper and lower limits and emergency stop protection.

Can achieve the test force, specimen deformation and beam displacement and other closed-loop control, can achieve constant speed test force, constant velocity displacement, constant velocity strain, constant load cycle, constant velocity deformation cycle and other tests.

A variety of control modes can be smoothly switched. At the end of the test, the initial position can be returned automatically.

4. Control software features

The control software can complete real-time load - deformation, load - displacement measurement and data processing, the results output and computer storage, loading and other functions, zero, calibration and other operations.

Support a variety of control methods, including open-loop constant speed and constant velocity, constant current stress and other closed-loop control.

Can record, save the test process data curve, you can curve comparison, easy to compare and print test report.

5. Safety protection device

When the test force exceeds the maximum test force of 2% -5%, overload protection, system unloading.

When the piston rises to the upper limit position, the stroke is protected and the pump motor is stopped.

Technical parameters: